Electric Fireplace Wall Hanging Ideas
In contrast to traditional wood or gas fireplaces, wall-mount electric ones can be hung straight out of the box. These fireplaces can be a great way of adding ambience to your home without the need for renovations or venting.
They are typically heavy and require careful installation. Follow these steps to install your new electric fire correctly.
1. Connect the Brackets
A wall-mounted or recessed fireplace instantly enhances the appearance of any room. It's the perfect solution for homes that don't have an existing fireplace opening or apartment dwellers.
Choose where you'd like to put your electric fire. It's important to find the ideal location that isn't susceptible to moisture and is at a minimum of just a few inches from furniture, drapes and high traffic areas. Mark the wall with layout marks to indicate the top and bottom plates for the fireplace frame.
Make use of a drill or another tool to make exploratory holes in the wall. Find studs using a stud-detector. Mark the drywall according to the location of the brackets for mounting your fireplace. Then, you can build the wall or patch and paint the drywall to prepare it for fireplace installation.
Depending on the wall-mounted fireplace you select, you might require the installation of both the screen and firebox in one unit or separate them by using a wall bracket. If you are unsure of your ability to complete this project, hire a general contractor or a skilled carpenter.
You can find an installation template that comes with all electric fireplaces. However it is recommended to keep a spirit level handy and a pencil to mark out the exact location where the wall brackets will be placed. Make use of the template to make sure that the power cable of the fireplace is able to connect to an outlet nearby to connect it.
Install drywall as smooth and flush as you can to give the fireplace a neat look. Add best wall mounted electric fireplaces fireplacesandstoves.uk to the bottom edge and then sand and paint the entire frame for an attractive appearance.
You'll need to put the hooks or slots on the back of the majority of wall-mounted electric fireplaces into the brackets that mount them. Be sure to align the slots or hooks prior to connecting the fire brackets. Once the fire is set you can add other elements such as driftwood logs, crystal embers, or decorative rocks.
2. Check the Bottom Bracket
The space above the mantel, fireplace or chimney breast is the perfect spot to hang artwork. There is a delicate balance between an artistic arrangement and one that doesn't detract from the overall design of the fireplace.
A common rule of thumb is that a picture should be 80percent of the length of the mantel or fireplace it is placed over. This will help keep it in proportion and make it look good on the wall. Other decorative and ornamental items placed on the mantel may also influence this size & proportional guideline.
If you plan to display a photo above your electric fire, the frame should be made of glass or another material that can handle high temperatures. If you're not sure about the frame, you can test it frame with a temperature sensitive cloth to see if it is suitable for this application.
The possibility of destroying artwork by smoke and hot stray heat is a typical concern when displaying pictures over a fireplace. This is not a problem with gas or wood-powered fireplace. However when you are planning to install an electric wall fire it is essential to follow the instructions of the manufacturer.
Most electric fires are equipped with an installation bracket that can be attached to the wall using either hanging screws or wall-mounted fixing systems. It is recommended that you make an exploratory hole in an isolated area of the wall prior to mounting your electric fire. Then, you can use a cable finder and pipe to verify whether there are any pipes or cables near the location you've chosen to mount it.
If so, you can place your fire on the electrical socket or move it to another location. If you choose to move it to a new spot, you'll need to ensure that the power cable will be able to connect from the fire to the electrical socket - this is especially important for older homes or homes with solid walls. If not, your electric fire won't be able to work properly. Some models come with a template that will show you where to drill the holes for this purpose, while others require a spirit level & pencil to mark the proper spots on your wall.
3. Connect the Power Cord
If you've installed a recessed electrical fireplace, you might need to move the plug socket from the wall to behind the unit. This can give it a cleaner look. Be sure to test your fireplace prior to doing this to ensure that everything is working exactly as it should.
The third method of mounting an electric fireplace is framing the room and then building it into the wall. This will give you a traditional elegant look and also allows for a mantel. The owner's guide for your particular model will include information about framing, securing the fireplace, and wiring.
When you're ready to mount your new electric fireplace on the wall begin by marking the location of installation using a marker or pencil. Use a carpenter's level to ensure that the area of installation is level and flat. You can use a studfinder to mark the location so that you know that you're drilling in a safe area.
Use the electric drill after having marked the installation area to create holes for the bracket screws or hanging screws. Make sure to follow the exact instructions in the owner's guideline for this step, particularly when you're installing the fireplace in a wall. If you're not sure of how to do this, you can always ask a professional to take care of the installation for you.
A cable organizer kit can be used to hide power cords. These kits typically come with sleeves, clips, or boxes to bundle cables. You can make use of fish tape or wire snakes to guide the cords. If you don't want to cut through your drywall or drywall, you can install an electric bridge kit to make more secure and safe connections.
You can also camouflage cords by using paintable wire covers, or by attaching them to the wall. Make sure to keep the cover or tacks from the heat source, however. This will shield the cord from damage and also prevent accidental contact.
4. Connect the adapter
A wall-mounted electric fireplace is an excellent alternative for home renovations or for those who do not have the space or funds to install a real gas fireplace. They are simple to hang and are ready to use straight out of the box. They're an ideal choice to those looking for a stylish, modern touch or warmth from a fireplace. These units can be hung on any wall, just like art, and they are electric with fan-powered heating.
Before beginning the actual installation process it's an excellent idea to gather all the equipment and tools you'll need. Read the user's manual to find specific instructions about how to install your electric fire. Certain models require that you screw brackets directly into the wall, while others could have a mounting plat that slides into slots or hookeds on the brackets. It is essential to remove all combustible material from the area in which you'll be installing a recessive unit. In general they should be kept at least 3 feet from the front of the fireplace and 1.5 feet away from its sides.
After you've inspected all the parts, you should connect your electric fireplace and ensure that it works correctly. This is an important step to ensure the flame effect screen and heater function exactly as they were intended to. This will give you an idea of the final product in its final position.
If you're confident that your electric fire is operating properly, you must think about covering the power cord. This will keep the finished product neat. It is possible to do this by using wire covers that are paintable or you can choose to install a new outlet that allows you to tuck the cord behind the unit. This will give your fireplace a seamless finish.